Monessen Berkley Oak 30 - Ceramic Fiber Gas Log Set — Manufacturer series photograph; pictured size may differ, and burner, firebox and surroundings are separately selected.

Manufacturer photography may show optional finishes and accessories.

Monessen

Monessen Berkley Oak 30 - Ceramic Fiber Gas Log Set

Model: BO30-F / Berkley Oak 30 - Ceramic Fiber

Starting at

$1,258.00 USD

Manufacturer product-only starting estimate; configuration and accessories may change the quote.

Product only. Installation and materials are additional. Venting, finishing, optional accessories, delivery, and taxes are not included. Your complete project will be quoted separately.

Request a Quote

Selections are preferences for your quote. Compatibility, availability, and additional charges will be confirmed.

Monessen

About this model

Seven sculpted oak logs plus the model-specific ember piece create a traditional fire with glowing ceramic-fiber surfaces. This 30-inch ceramic fiber model is designed for a separately selected Natural Blaze gas burner.

Log set with required burner selection. Choose the fuel and ignition system, then confirm fireplace fit with Washburn’s. The available family sizes are 18, 24 and 30 inches; this page covers BO30-F.

Manufacturer series photograph; pictured size may differ, and burner, firebox and surroundings are separately selected.

Specifications
Log model
BO30-F
Nominal log size
30 in
Log material
Ceramic fiber
Required burner models
NB24NV-B / NB24PV-B / NB24NIF-B / NB24PIF-B
Fuel / ignition
Factory natural gas or propane; millivolt or IPI, separately selected
Natural gas input — current burner
26,000–37,000 BTU/h
Propane input — current burner
27,000–36,000 BTU/h
Minimum clear fireplace opening — front W × D × back W × H
33 × 14.5 × 25.25 × 17 in; August 2026 manual, before front-barrier adjustment
Burner weight — excludes separate log package
35 lb
Natural gas supply / manifold pressure
5–10 in w.c. inlet; 3.5 in w.c. manifold
Propane supply / manifold pressure
11–13 in w.c. inlet; 10 in w.c. manifold
IPI power
6 V DC; four AA batteries, optional transformer
Heating coverage
Up to 1,300 sq ft — manufacturer website estimate, dependent on climate, insulation, layout and installation; not a sizing guarantee
Manuals and documents
Standard features

BO30-F 30-inch nominal log set in Ceramic fiber. Seven sculpted oak logs plus the model-specific ember piece create a traditional fire with glowing ceramic-fiber surfaces.

Designed for the matching Natural Blaze burner, which creates yellow flames and a glowing ember bed. Burner, ignition and fuel are required selections, not automatically included in the log-only SKU.

With a selected millivolt burner: burner/grate, switch and harness, approved ember materials, flex-line fittings and anchors are supplied with the burner package. An IPI burner adds electronic intermittent-pilot ignition and the included RC300 remote.

Required components

Select the listed NB24-B burner for BO30-F, in natural gas or propane and millivolt or IPI ignition. Logs and burner are separate packages and must both be specified in the quote.

An approved existing fireplace or listed vent-free firebox, adequate room combustion air, a correctly sized gas supply and qualified installation are required. Verify fireplace construction and all mantel, side-wall, hearth and overhead clearances.

For vented use, provide the manual's permanent damper opening and damper clamp; do not use thermostat operation. Four AA batteries are needed for battery-powered IPI operation.

Optional features and accessories

Millivolt options: RCB battery remote, TSST touchscreen thermostat remote, TS temperature sensor, RRCM insulated receiver cover and the fuel-specific HILOKTN or HILOKTPLP variable-flame kit. Thermostat options are limited to approved vent-free use.

IPI option: ACCK-IPIP 6 V DC transformer; RC300 remote is included with the selected IPI burner rather than an added remote charge.

VR1000A volcanic rock is an optional approved media accessory. A fireplace enclosure, trim, doors, mantel and finishing materials are separate installation items, not parts of the log set.

Features & options

Features & options

Review available selections. Included equipment and any additional charges are confirmed on your quote.

Required fuel and burner configuration

(required)

Other selections

  • Natural gas millivolt — NB24NV-B
  • Propane millivolt — NB24PV-B
  • Natural gas IPI — NB24NIF-B
  • Propane IPI — NB24PIF-B

Burner is separately packaged and selected. The 30-inch logs use the 24-size burner. Select factory fuel type; these burners cannot be converted between fuels.

Installation setting

(required)

Other selections

  • Vent-free — subject to local approval and room-air assessment
  • Vented — approved fireplace and damper configuration required

Qualified installation review is required. Thermostatic operation is not allowed in a vented installation.

Millivolt control accessories

Other selections

  • Standard on/off switch
  • RCB battery remote
  • TSST touchscreen thermostat remote
  • TS temperature sensor
  • RRCM insulated receiver cover
  • HILOKTN variable flame control — natural gas
  • HILOKTPLP variable flame control — propane

Separately selected accessories for millivolt burners only; thermostat accessories are for approved vent-free installations. Match accessory to burner and gas type.

IPI power accessory

Other selections

  • Standard battery operation and included RC300 remote
  • ACCK-IPIP 6 V DC transformer

IPI burner includes RC300 control and battery holder; four AA batteries power the system. Optional transformer supplies mains-derived low-voltage power.

Additional installation supplies

Other selections

  • No additional accessories
  • VR1000A volcanic rock
  • C-CLAMP damper clamp for vented installation

Damper clamp is required when the approved vented installation calls for it; follow the manual's chimney and permanent damper-opening tables. Add media only as instructed.

Included log design

Monessen Berkley Oak 30 - Ceramic Fiber Gas Log Set manufacturer series illustration
Berkley Oak 30 - Ceramic Fiber log design Included

Seven sculpted oak logs plus the model-specific ember piece create a traditional fire with glowing ceramic-fiber surfaces. Manufacturer series photograph; pictured size may differ, and burner, firebox and surroundings are separately selected.

Log set only; burner system is required separately.

Technical notes

Technical values below apply to the current NB24-B burner with this log size, using the August 2026 manufacturer manual. Older burner revisions and several website tables differ; use the manual shipped with the supplied appliance.

Minimum opening dimensions are a screening check, not a complete installation plan. A front barrier up to 3 inches high increases required depth to 16.5 inches. A barrier higher than 3 inches is not recommended. Mantel projections and clearances require the manual's installation diagrams.

Vent-free operation uses room air and is subject to local restrictions; this is supplemental heat. Do not install in a bedroom or bathroom. If fireplace glass doors are present, operate only with the doors fully open. Do not burn wood or other solid fuel in the log burner.

Logs must remain in their prescribed positions. Keep media clear of ports and pilot as directed. Only the gas indicated on the rating plate is permitted; fuel conversion is not allowed.

Manufacturer series photograph; pictured size may differ, and burner, firebox and surroundings are separately selected.

Installation, materials, venting where applicable, finishing, delivery, optional accessories and tax are quoted separately.

View the manufacturer’s product page

Monessen

Make it yours.

Choose the options you want us to include in your inquiry. We will review your model, selected options, and installation requirements before preparing a quote.

Monessen Berkley Oak 30 - Ceramic Fiber Gas Log Set

Burner is separately packaged and selected. The 30-inch logs use the 24-size burner. Select factory fuel type; these burners cannot be converted between fuels.

Qualified installation review is required. Thermostatic operation is not allowed in a vented installation.

Separately selected accessories for millivolt burners only; thermostat accessories are for approved vent-free installations. Match accessory to burner and gas type.

IPI burner includes RC300 control and battery holder; four AA batteries power the system. Optional transformer supplies mains-derived low-voltage power.

Damper clamp is required when the approved vented installation calls for it; follow the manual's chimney and permanent damper-opening tables. Add media only as instructed.

Log set only; burner system is required separately.

Installation and materials are quoted separately.

We will use these details to respond to your inquiry.