Harman

Harman Pathfinder P61 Pellet Stove

Model: Pathfinder P61 / installation model P61-C

Starting at

$5,179.00 USD

Manufacturer product-only starting estimate; configuration and accessories may change the quote.

Product only. Installation and materials are additional. Venting, finishing, optional accessories, delivery, and taxes are not included. Your complete project will be quoted separately.

Request a Quote

Selections are preferences for your quote. Compatibility, availability, and additional charges will be confirmed.

Harman

About this model

The Harman Pathfinder P61 is a freestanding pellet stove in the P-Series. Its 72 lb hopper, accordion heat exchanger and large ash pan support extended heating with less frequent refilling and ash removal. Harman lists PelletPro bottom-up feed, exhaust-sensing room-temperature control, a glass airwash, flame-reactive mirrored glass and direct-vent installation capability.

The manufacturer lists 21,400–60,700 BTU/hr input, 103-1/4 sq in viewing area and a heating guide up to 3,500 sq ft. Actual coverage, output and appearance depend on pellet fuel, climate, building efficiency and installation. The P61-C installation manual governs vent routing, clearances and floor protection.

Optional appearance and use choices include brushed stainless Modern or Leaf trim, decorative inlays, ceramic log set, a 60 lb hopper extension, side heat shields, air grille and a cast-iron hearth pad. Photos may show optional trim, inlays or accessories. The manufacturer’s Starting at amount is a product-only estimate; installation, venting, finishing materials, accessories, delivery and tax are separate. Request a quote for the selected configuration and site.

Specifications
Fuel
Pellet
Appliance width
23-1/2 in
Appliance height
36-1/2 in
Appliance depth
29-3/8 in, including entire unit
BTU/hr input
21,400–60,700, EPA tested
Heating capacity guide
1,300–3,500 sq ft per P-Series brochure
Viewing area
103-1/4 sq in
Efficiency
85% LHV / 79% HHV weighted test average
Emissions
1.5 g/hr
Hopper capacity
72 lb; 132 lb with optional extension per brochure
Vent size
3 in per P61-C manual
Weight
247 lb per P-Series brochure
Minimum floor protector
25-1/8 in W × 27-3/4 in D per brochure; verify current manual
Manuals and documents
Standard features

The P61 has a 72 lb hopper, accordion heat exchanger, large ash pan and flame-reactive mirrored glass.

PelletPro bottom-up feed, Exhaust Sensing Probe room-temperature control and glass airwash are standard. Direct-vent installation is possible subject to the P61-C manual.

Required components

Code-compliant pellet venting, floor protection sized for the final placement and suitable electrical supply are required. The P61-C manual governs clearances, termination and outside-air requirements.

Select site-specific venting, floor protector, permits and installation materials separately after confirming the appliance plate.

Optional features and accessories

Modern Brushed Stainless and Leaf trim, Deer Slate, Trail Riders Slate and Brushed Stainless Deer Plate inlays are available subject to current P61 compatibility and finish confirmation.

Ceramic log set, 60 lb hopper extension, side heat shields, brushed-stainless air grille and Harman Protect cast-iron hearth pad are optional. Battery-backup compatibility must be confirmed separately. Pictured accessories may be optional.

Features & options

Features & options

Review available selections. Included equipment and any additional charges are confirmed on your quote.

Included technologies

Harman PelletPro feed system shown by manufacturer
PelletPro feed system Included

P-Series pellet feed illustration.

Harman Exhaust Sensing Probe control shown by manufacturer
Exhaust Sensing Probe control Included

P-Series temperature control illustration.

Standard P61 technology.

P61 door trim

Harman Modern Brushed Stainless shown by manufacturer
Modern Brushed Stainless Optional

Confirm P61 compatibility and separately quoted accessory.

Harman Leaf brushed stainless shown by manufacturer
Leaf brushed stainless Optional

Shown in brushed stainless; matte black is a separate request.

Other selections

  • Standard appearance
  • Leaf matte black with stainless accent

Confirm current kit and finish availability; Leaf photo shows brushed stainless.

Decorative inlay

Harman Deer Slate shown by manufacturer
Deer Slate Optional

Confirm P61 compatibility and separately quoted accessory.

Harman Trail Riders Slate shown by manufacturer
Trail Riders Slate Optional

Confirm P61 compatibility and separately quoted accessory.

Harman Brushed Stainless Deer Plate shown by manufacturer
Brushed Stainless Deer Plate Optional

Confirm P61 compatibility and separately quoted accessory.

Other selections

  • None

Confirm P61 front compatibility.

P61 accessories

Harman Ceramic log set shown by manufacturer
Ceramic log set Optional

Confirm P61 compatibility and separately quoted accessory.

Harman 60 lb hopper extension shown by manufacturer
60 lb hopper extension Optional

Image filename identifies P61/P68; brochure gives P61 132 lb total with extension.

Harman Cast-iron hearth pad shown by manufacturer
Cast-iron hearth pad Optional

Floor protection is required; confirm this pad meets the site-specific manual.

Other selections

  • None requested
  • Side heat shields
  • Brushed-stainless air grille

Describe multiple requests in the message. Floor protection is required; the branded pad is one optional approach.

Venting and floor protection

(required)

Other selections

  • Assess existing setup
  • New vent and floor protection

Approved venting, floor protector and installation materials are selected separately.

Technical notes

The 1,300–3,500 sq ft brochure heating range is a guide; fuel, climate, building efficiency and venting affect performance.

Illustrative P61 clearances vary with side shields. Follow the current P61-C installation manual and unit instructions; hot surfaces can cause burns.

The Starting at amount covers the product estimate only. Delivery, venting, installation, materials, accessories and taxes are separate.

View the manufacturer’s product page

Harman

Make it yours.

Choose the options you want us to include in your inquiry. We will review your model, selected options, and installation requirements before preparing a quote.

Harman Pathfinder P61 Pellet Stove

Confirm current kit and finish availability; Leaf photo shows brushed stainless.

Confirm P61 front compatibility.

Describe multiple requests in the message. Floor protection is required; the branded pad is one optional approach.

Approved venting, floor protector and installation materials are selected separately.

Installation and materials are quoted separately.

We will use these details to respond to your inquiry.